Are You Losing Money on Feed and Labor? Let’s Fix Your Farm’s Biggest Headaches
Running a cattle or sheep farm is hard work. You know the struggle. Every day, you face the same problems. The cows pick out the tasty grain and leave the healthy straw behind. This means wasted money and uneven nutrition. Your animals do not grow fast enough. Hiring workers to cut and mix feed by hand costs too much. It is slow and tiring. Also, if you use wet feed like brewer’s grains or silage, it goes bad quickly in summer. You worry about mold and spoilage. You need a machine that works hard, saves money, and keeps your animals healthy. You need a simple, strong, and reliable mixer.
The Ultimate Solution: Industrial Horizontal TMR Feed Mixer
This machine is not just a mixer. It is a complete feed kitchen for your farm. We call it the Horizontal Type Grass Mixer. It is designed for big farms and small families. It handles everything: dry straw, wet silage, corn grain, soybean meal, and even special wet waste like distiller’s grains. The secret is the double-shaft design. Two big screws spin inside the tank. They pull material from the ends to the middle. This creates a “cyclone” effect. Nothing gets stuck in the corners.The machine cuts and mixes at the same time. It has sharp alloy blades on the screws. These blades chop long straw into small pieces (3 to 5 cm). This makes it easy for animals to eat and digest. You can add water or liquid supplements directly into the tank. The machine mixes liquids and solids perfectly in just 10 to 15 minutes. The result is a Total Mixed Ration (TMR). Every bite your animal takes has the same nutrition. No more picky eating. No more wasted feed.
Why This Horizontal Mixer Beats Vertical Ones and Manual Work
You might wonder why you should choose a horizontal machine. Here are the clear reasons why farmers love this design:##### Low Profile and Easy LoadingThe tank is wide but not too tall. You can load feed from the side or the top using a small loader or even by hand. It fits in standard barns without hitting the roof. Vertical mixers are tall and hard to feed. This one is simple.##### Gentle on Fibers, Tough on LumpsThe screws spin at a perfect speed. They do not destroy the good fibers in the straw. This keeps the energy in the feed high. But, they are strong enough to break up hard clumps of corn or hay. The mixing is soft but fast.##### Dry and Wet Use – All Year RoundIn winter, mix dry straw and grain. In summer, mix wet silage and fresh grass. This machine handles moisture levels from 40% to 50% easily. For wet by-products like beer residue or soy sauce residue, this is a game-changer. It stops the wet stuff from rotting before you feed it.##### Save Huge on Labor CostsOne person can operate this machine. One machine can replace 20 workers. Imagine saving 20 salaries every month! You load the ingredients, press a button, and wait. When it is done, the hydraulic door opens at the bottom. The feed slides out cleanly. No residue left inside.
Technical Specifications for Your Farm Plan
We know you need real numbers to plan your budget and space. Here is the data for our standard models. We can also customize the size for you.
| Model | Capacity (Cubic Meters) | Capacity (KG/Batch) | Motor Power (KW) | Dimensions (LWH mm) | Weight (KG) |
|---|---|---|---|---|---|
| Small Home Use | 1 – 2 | 500 – 1000 | 5.5 – 7.5 | 200012001200 | ~800 |
| Standard Farm Use | 3 – 5 | 1500 – 2500 | 11 – 15 | 300018001800 | ~1800 |
| Large Ranch Use | 6 – 8 | 3000 – 4500 | 18.5 – 22 | 360024002200 | ~2500 |
| Industrial Line | 10+ | 5000+ | 30+ | Customized | Customized |
Key Details:
- Mixing Time: 10 to 20 minutes per batch depending on material.
- Discharge: Hydraulic bottom door or conveyor belt option.
- Blades: High-chromium alloy, lasts 1200 to 1500 hours.
- Gearbox: Heavy-duty, sealed design, low noise.
- Power: 380V / 50Hz (3-phase) or custom for your country.
- Material: Thick carbon steel or Stainless Steel (SS304) for the tank.
Real-World Use Cases: Who Needs This Machine?
This machine fits many different farming scenes. Here is how different customers use it:##### The Dairy Farmer (50-200 Cows)You need consistent milk production. You mix alfalfa hay, corn silage, and concentrate. The mixer ensures every cow gets the same protein and energy. This prevents milk fat drop and keeps cows healthy. You use the electronic scale system to weigh ingredients precisely.##### The Beef Cattle Ranch (Large Scale)You have thousands of cattle. You need to process cheap roughage like wheat straw or rice straw. This machine chops the straw and mixes it with distiller’s grains (a cheap wet by-product from alcohol factories). This lowers your feed cost per kilogram of meat significantly.##### The Sheep and Goat BreederYour animals are smaller but picky. You need to chop straw very finely. The adjustable blades help you control the length. You can also mix medicinal herbs or special pellets into the feed easily.##### The Feed Processing PlantYou buy raw materials and sell pre-mixed feed. The large capacity (5 to 10 cubic meters) lets you produce 10,000 tons a year. The wear-resistant steel means you can run it 24/7 with little downtime.
Durability and Safety: Built for the Long Haul
Farms are tough environments. Dust, mud, and constant use break weak machines. Our mixer is built different.
- Strong Gearbox: We use heavy-load gearboxes. They are tested for 20,000 hours of use.
- Sealed Bearings: Dust cannot get into the moving parts.
- Safety Features: Emergency stop buttons. Safety locks on the doors so the machine cannot start if open. Overload protection for the motor.
- Maintenance: Easy to grease. Blades are replaceable. You do not need a specialist to fix it.
We offer a 1-Year Warranty for the whole machine. We also provide Lifetime After-Sales Service. If a part breaks after 10 years, we help you find a replacement. We have video guides for installation and repair.
Frequently Asked Questions (Simple Answers)
Q: Can I mix wet and dry feed at the same time?A: Yes. You can add water or wet by-products like beer grains directly. The machine mixes them evenly without making a mud mess.Q: How much electricity does it use?A: It depends on the size. A standard 3-cubic meter machine uses about 11KW to 15KW. This is much cheaper than paying 5 workers.Q: Will it mix sticky corn stalks?A: Yes. The blades cut the stalks while the screws push them. It handles high-fiber material very well.Q: How do I clean it?A: After you empty the feed, you can add a little water and run the machine for 2 minutes. This rinses the inside. Or use a high-pressure water gun. The bottom door opens fully, so there are no dead corners.Q: Do you have a weighing system on board?A: Yes, we have an option for electronic load cells. You can see the weight on a digital screen. This helps you keep the recipe exact.
Stop Wasting Time and Feed – Get Your Custom Quote Now
You have seen the specs. You know it solves your labor problem. You know it saves feed costs. Now is the time to act. Do not let another season go by with high costs and tired workers.We are a factory-direct supplier. We do not have a middleman. This means you get the best price for high quality. We have shipped to over 30 countries. We know how to pack the machine safely for sea shipping.Tell us your needs:
- How many animals do you have?
- What kind of feed do you use (straw, silage, grain)?
- Do you need a dry type or wet type mixer?
- What is your voltage requirement?
Send us an inquiry today. We will reply within 12 hours with a price and a video of the machine working. Let’s build a better, more profitable farm together. Click “Contact Now” or email us directly!
